Unveil Hidden Vibrations
Without Production Stop
In Real Time
Finally, a Vibration Report Everyone Can Understand
Traditional vibration analysis produces plots and numbers that only experts can read. When something is wrong, the expert knows — but explaining the urgency to a maintenance manager, a production team, or a site director is another matter entirely. VibraVizja® closes that gap: the amplified video makes the problem visible to everyone, so the whole team can see what is happening and agree on what to do next.
Drag the slider up or down — same machine, same moment
The entire workflow happens on-site, in real time — from pointing the camera at your asset to having a clear amplified video in your hands. No lab. No post-processing. No waiting.
Capture
Point the high-frequency camera at your asset from a safe distance. No sensors, no surface prep, no shutdown — setup takes just a few minutes, directly on-site.
Amplify
The software processes the footage in real time and delivers an amplified video within seconds — on the spot, with zero post-processing and no data to send anywhere.
Analyse
The amplified video reveals exactly how your machine vibrates — which parts move, at which frequency, in which mode. Everything visible on screen, right there in the field.
Act
Share the video with your extended team — no expertise needed, anyone can understand what is going on if they can see the vibrations. Everyone aligns on the fix.
Where VibraVizja® Makes a Difference
From rotating machinery to civil structures — Vibration Amplification reveals the invisible in every industrial context.
Rotating Equipment
Pumps, compressors, fans, motors, gearboxes — identify imbalance, misalignment, looseness, and bearing faults without touching the asset.
Industrial Structures
Platforms, pipe racks, supports, and skids — detect resonance, structural weakness, and fatigue-inducing vibration modes across entire frameworks.
Piping Systems
Visualise pipe vibration, pressure pulsation effects, and support deficiencies across complex piping networks — simultaneously, in one measurement.
Civil Infrastructures
Bridges, buildings, towers, and foundations — monitor structural dynamic behaviour under operating loads, wind, and seismic events.
Energy Production
Wind turbines, turbogenerators, and power plant auxiliaries — high-value assets where a single undetected fault can cause catastrophic downtime.
Process & Chemical
Hazardous or hard-to-access assets — measure from a safe distance in areas where physical sensor attachment is impractical or unsafe.
VibraVizja® in the Field in Poland
Real measurements on real machines — see how maintenance teams in Poland identified root causes on-site, without stopping production.
Read the Case Studies →See VibraVizja® on Your Own Machine
We travel anywhere in Poland, and run a live measurement on one of your machines while it is running — no production stop, no sensors, nothing attached. We leave you with the amplified videos. No slides, no commitment — just the technology working on your equipment, so you can judge for yourself.
Request a Free On-Site TrialThree Ways to Work with VibraVizja®
Whether you want full autonomy, a turnkey service, or a tailored solution — we have a model that fits your organisation and your ambitions.
Standard Kit
Everything you need to run VibraVizja® independently — the high-frequency camera, the processing software, and full onboarding training included. Your team is operational from day one, with no dependency on us for every measurement.
Measurement Service
Our team handles the measurement — on-site at your facility or remotely — and delivers the amplified video and a clear analysis report. Ideal if you want to experience VibraVizja® on a specific problem without committing to hardware, or for periodic campaigns.
Custom Kit & R&D
For specific applications, research projects, or environments that require a tailored setup — we work with you to design the right configuration. From specialised optics and mounting solutions to custom software integration and R&D partnerships.
Not sure yet? We'll come to your facility and measure one of your machines — no commitment ↓
Built for Maintenance Professionals
Every feature designed to complement — not replace — your existing vibration measurement tools.
No Sensors. No Shutdown.
Measure any asset the camera can see. No surface preparation, no mounting hardware, no interruption to production schedules.
Full Structure, One Shot
Traditional accelerometers measure one point at a time. VibraVizja® captures the vibration map of the entire structure simultaneously — revealing resonance paths you'd otherwise miss.
Instant Frequency Analysis
FFT spectra and frequency-filtered amplification let your team identify vibration sources on-site, without any post-processing delays.
HD Dynamic Reports
Export high-resolution reports with annotated video, frequency data, and measurement summaries — ready to share with management or clients.
Developed in Europe, Supported Locally
VibraVizja® was developed by our own expert team in Poland and France. We built it, we know it inside out, and we support it directly — with a level of technical depth that a product reseller simply cannot offer.
VibraVizja® Works Alongside What You Already Have
Whether you run a structured CBM programme or simply need answers when something feels wrong — VibraVizja® adds a visual layer without disrupting what is already working.
You take periodic measurements
Your route data flags something unusual. Instead of waiting for the next cycle, point the camera and get a visual answer on the spot — then share the amplified video to get the repair approved without delay.
You have sensors and alarms
An alarm fires. You know something is wrong but not exactly what or where. Point the camera, get an amplified video in seconds, and see exactly which part is affected — before touching anything or stopping production.
You are starting from scratch
VibraVizja® is the simplest possible entry point — no infrastructure, no sensors, no complex setup. When you are ready to go further, the visual data tells you exactly where to put your first sensors, so you invest where it matters most.
Something feels wrong right now
No programme needed. When a machine starts behaving unexpectedly, grab the camera and get a clear picture within minutes. Works perfectly as a standalone spot-check — zero commitment, immediate answers, no disruption.
Accelerometers give you precise numerical data at known measurement points. VibraVizja® gives you the full visual picture of how the machine actually moves. Used together, they make your CBM programme faster to act on, easier to justify, and more effective at every level of your organisation.
Try It on Your Own Equipment
We come to your facility — anywhere in Poland — set up in minutes, and run a live measurement on one of your machines while it is running at full load. No production stop, no sensors, nothing attached to the machine. You see the amplified video on the spot, and we leave you with the footage. No slides, no sales pitch, no commitment. Just VibraVizja® on your asset, so you can judge for yourself.
Frequently Asked Questions
Everything maintenance and reliability professionals ask before their first VibraVizja® measurement.
What faults can VibraVizja® detect?↓
VibraVizja® can reveal a wide range of mechanical faults through vibration amplification. On rotating machinery, it detects imbalance (visible at 1× running speed), misalignment (typically at 2× running speed or dominant in the axial direction), mechanical looseness (sub-harmonics and truncated waveform), and bearing faults (at specific defect frequencies such as BPFI, BPFO, and BSF). It is also highly effective for detecting structural resonance.
Can VibraVizja® be used while the machine is running at full load?↓
Yes — and this is one of the most important advantages of VibraVizja®. Because the measurement is entirely contactless, there is no need to stop the machine, attach sensors, or schedule a production window. The camera captures the vibration of the asset while it is running at its normal operating speed and load.
How does vibration amplification work?↓
Vibration amplification uses a high-frequency camera to record the surface of a machine or structure. The video is then processed by software that detects and amplifies the micro-movements present in each frame — movements that are invisible to the naked eye, often smaller than a fraction of a millimetre. The result is an amplified video in which the vibration of the structure becomes clearly visible.
How long does an on-site VibraVizja® measurement take?↓
The setup takes a few minutes — position the camera, connect the laptop, and you are ready. The video recording itself lasts only a few seconds. Processing is near-instantaneous. For a typical rotating machine inspection, the team gets meaningful, actionable results on the spot — often within 10 to 15 minutes of arriving at the asset.
Do I need to be a vibration expert to use VibraVizja®?↓
No — and this is by design. VibraVizja® was built so that a maintenance technician can set up and run a measurement in the field without specialist training. The amplified video output is immediately readable by anyone: if the machine is vibrating abnormally, you see it.
Can VibraVizja® replace my existing vibration monitoring programme?↓
VibraVizja® is not designed as a replacement for traditional vibration monitoring — it is a complementary tool that adds a visual layer to your existing programme. Accelerometers and route-based measurements give you precise numerical data and long-term trending. VibraVizja® gives you the full spatial picture.
Is VibraVizja® a European solution?↓
Yes. VibraVizja® was developed in Europe by jll.spear, a European maintenance and reliability services company. In Poland, VibraVizja® is distributed and supported by jll.spear Sp. z o.o., based in Kraków at ul. Żmujdzka 3, 31-426 Kraków.